Mic Test for Streamers

Allow the microphone and talk like you do on stream. The meter shows your level, and after a few seconds you get hints. Everything runs in the browser.

Runs in your browser. Nothing is uploaded or saved.

Level
-inf
Peak
-inf

Allow the microphone and talk like you do on stream. The meter shows the level in dB like the OBS mixer.

Hear the mic the way OBS does

Browsers process the microphone for calls: noise suppression, echo cancellation and automatic gain are on by default. OBS does not use this browser processing. That is why a mic can sound clean in a call or in a quick online check and still hiss, pump or echo on stream.

Turn all three switches off to hear something close to the signal OBS gets. Then turn them back on one at a time and listen to what each one was hiding:

  • Noise suppression hides fan and PC hum. If the difference is big, you will want a noise suppression filter in OBS.
  • Echo cancellation hides sound from your speakers leaking into the mic. If you hear the game or Discord coming back with it off, your viewers will hear it too. Headphones fix this better than any filter.
  • Auto gain pushes quiet speech up and pulls loud speech down. With it off you see your real level, which is what you set in OBS.

Set the level: voice peaks between -12 and -6 dB

The vertical meter works like the one in the OBS audio mixer: it reads in dBFS, 0 dB is the ceiling, and every useful value is below zero. The peak marker holds your loudest moment for about 1.5 seconds, then slowly drops, so you have time to read it.

Talk at your normal stream volume, then laugh or shout the way you do when something happens in game. Loud moments should land between -12 and -6 dB.

  • Peaks stay well below -12 dB. Raise the gain on the mic or audio interface, or the input level in system sound settings. Move a little closer to the mic too: it makes your voice louder without making the room louder.
  • Peaks reach -6 dB at normal speech. There is no room left for a shout. Lower the gain a little.
  • The clipping counter goes up. The signal hit 0 dB and the sound is distorted. Lower the gain at the source. A limiter in OBS keeps the stream from clipping, but it cannot repair a signal that was already distorted before it reached OBS.

Measure your background noise

Start the 5-second noise measurement and stay silent, with the PC, fans and air conditioning running as they do during a stream. You get one number: how loud your room is in the mic.

This number is what the noise gate and noise suppression work with. The further your voice is above it, the less filtering you need. If the gap is small, fix the source first: move the mic closer to your mouth and away from the PC case, point it away from the fan. Heavy filtering on a noisy signal makes speech sound choppy or underwater.

Record 10 seconds and listen back

Record the line you would open a stream with and play it back in headphones. Listen for hiss, hum, keyboard clicks, popping on "p" and "b" sounds and room echo. Your viewers will hear all of it, usually louder than you expect.

The recording exists only in your browser. It is not uploaded to our server, it disappears when you close the page, and the Delete button removes it right away.

OBS filters: starting points from your measurements

In OBS, open the menu of your mic in the Audio Mixer and choose Filters. A common order from top to bottom is Noise Suppression, Noise Gate, Compressor, Limiter. OBS recommends keeping the limiter last.

The values below are starting points, not fixed rules: every mic, voice and room is different. After each change, record a test clip and listen.

  • Noise Suppression. RNNoise is the default method and handles fans and steady hum well, at the cost of more CPU than Speex. With an NVIDIA RTX card, NVIDIA Noise Removal is also available once the NVIDIA Broadcast SDK is installed. No method rescues a loud room.
  • Noise Gate. OBS defaults are -32 dB to close and -26 dB to open. Set the close threshold a few dB above your measured noise and the open threshold a few dB higher, still below your quietest speech. The test suggests both values from your noise measurement. If the ends of words get cut, lower the thresholds or raise the hold time (200 ms by default).
  • Compressor. The OBS default ratio of 10:1 is heavy for a voice. Start at 3:1 to 4:1 and set the threshold a few dB below your usual peaks, so only loud moments get squeezed. Use output gain to bring the overall level back up.
  • Limiter. A threshold of -1 to -3 dB works as a safety ceiling for sudden screams. The OBS default is -6 dB.

Then check the OBS mixer: with filters on, your loud moments should still peak around -12 to -6 dB. Treat the OBS meter as the final word, since browser and OBS readings can differ by a couple of dB.

If OBS shows your mic only on the left channel, as often happens with an audio interface, tick Mono for it in Edit - Advanced Audio Properties.

Bluetooth headsets

When the mic of a Bluetooth headset is active, the headset switches to a call mode: sound goes mono and quality drops, both in your ears and in the mic. For streaming, a wired or USB mic is the safer choice.

The rest of your setup

The same checklist covers your webcam and headphones. When audio is sorted, the OBS bitrate calculator handles the video side.

Questions and answers

How do I hear myself in the mic test?

Record a 10-second clip and play it back, ideally in headphones. Turn off noise suppression, echo cancellation and auto gain first if you want to hear roughly what OBS will capture.

What level should my mic be at in OBS?

Aim for voice peaks between -12 and -6 dB on the OBS mixer meter, including loud moments. Peaks at 0 dB mean clipping. Browser and OBS readings can differ by a couple of dB, so do the final check in OBS.

How do I test my mic in OBS Studio?

Talk and watch your mic on the Audio Mixer meter. To hear yourself, pick your headphones in Settings - Audio - Advanced - Monitoring Device and set the mic to Monitor and Output in Edit - Advanced Audio Properties. Monitoring has a slight delay, so a short local recording is easier to judge.

Why does my mic sound clean in Discord but noisy on stream?

Discord and browsers apply their own noise suppression, echo cancellation and gain control. OBS takes the mic without that processing. Switch it off in this test to hear the difference, then add noise suppression and a noise gate in OBS.

Why can viewers hear my game through my mic?

Your speakers play the game, and the mic picks it up. Calls hide this with echo cancellation, OBS does not. Use headphones. Turning the echo cancellation switch off in this test lets you hear how bad the leak is.

Is my recording uploaded anywhere?

No. The 10-second recording exists only in your browser and is not sent to our server. It disappears when you close the page, or right away if you press Delete.

Check also

Webcam Test for Streamers

Live preview with the real resolution and FPS of your camera, plus tips for setting it up in OBS.

Open →

All tools →